PC is excellent engineering plastic used worldwide. PC is a type of non-crystal thermoplastic resin with various good mechanical properties including electrical insulation, extensibility, dimensional stability, chemical resistance, high strength, heat res

The amount of the adhesive must be used according to the specific size of the product. The sticky surface can not be completely painted with a small amount of adhesive. when the curing shrinkage of adhesive bring into air, it will affect appearance.

Bake the board with a blast oven. When the temperature is between 140 and 160, it can be formed.

Acrylic board also known as plexiglass is an important thermoplastic material early developed. Mainly used in construction, sanitary ware, advertising, decoration and so on. As a sound barrier transparent material, there are less applications in domestic.

Notes of using acrylic products Simple distinction and identification methods of Pure new acrylic board and regeneration board Distinction  methods

Thermal deformation stability of ordinary acrylic plate is in about 100 degrees. Therefore you should pay attention to the temperature value when using acrylic products, and temperature should not be higher than 90 degrees in continuous use.

1.The light transmission is strong. The organic glass plate used in the outdoor advertising is excellent in light transmission, and is equipped with a built-in light source, and the brightness is uniform

1.Acrylic heated at 70 degrees will be deformed. When it heated over 100 degrees will soften, we should avoid using it at that degree.

1.Jackhammer drilling (pneumatic, electric) Portable and convenient, few environmental restrictions. But there are some shortcomings: jackhammer can not drill a big hole or a special-shaped hole, and the hole drilled is not standard. A jackhammer drillin

Acrylic polishing has the following methods: according to the characteristics of the acrylic and the section 1. AD Marks &crystal characters, large display rack, generally hanging on the high wall, few people care about it, also few people go to see it,

Extruded acrylic sheet and cast acrylic sheet are all belongs to acrylic products.  But there is still some different points because of the difference production menthod.

All should understand acrylic sheet has high permeability luminosity, low turbidity, light but strong, good processing performance, rich color, excellent electrical insulation, excellent weather resistance,and is able to withstand high temperature, UV lig